How to Dial In "Let the Bridges Burn" by Killswitch Engage - Guitar Tone Settings
Gear for "Let the Bridges Burn"
Suggested rig · the original isn't documented.
Knob Positions, Pickup, and Tuning
Where to set the knobs for this tone. Each value is on the standard 0–10 amp scale.
On your amp, these numbers won't sound the same.
Get the settings for my ampHow the artist had their guitar configured for this take.
From As Daylight Dies (2006). No source ties a rig to this song, so an ESP LTD MH-1000 into a Mesa/Boogie Dual Rectifier stands in. A tight, high-gain tone on the bridge humbucker. Tuning isn't documented here.
Common Questions About the "Let the Bridges Burn" Tone
What guitar did Killswitch Engage use on "Let the Bridges Burn"?
The guitar on "Let the Bridges Burn" (released 2006) isn't documented; the ESP LTD MH-1000 above gets the sound. Pickup selector: bridge pickup on the guitar.
What amp settings does "Let the Bridges Burn" need?
Settings for this sound: Gain 8, Bass 6, Mid 5.5, Treble 6.5, Presence 6, Volume 7. Each value is on the standard 0–10 amp scale; match them on your amp first, then nudge to taste. ToneMirror can translate these positions for whatever amp you actually own.
Can I play "Let the Bridges Burn" without the original gear?
Yes. ToneMirror takes the settings above and adapts it to your guitar, amp, and pedals - so you can chase the "Let the Bridges Burn" tone on a Katana, a Helix, a tube combo, or anything else. The translation accounts for EQ curve, gain structure, and pickup type so the result actually sounds like the record, not just the same knob numbers on different gear.
More Tones You Can Dial In
Tone references for "Let the Bridges Burn" by Killswitch Engage are provided for educational use. ToneMirror is not affiliated with the artists or labels referenced.