You Won't Go Before You're Supposed To album cover - Knocked Loose
Guitar tone settings

How to Dial In "Blinding Faith" by Knocked Loose - Guitar Tone Settings

The rig

What Knocked Loose Actually Used on "Blinding Faith"

The settings

Original Knob Positions, Pickup, and Tuning

Amp settings - EVH 5150III 100W

Where to set the knobs for this tone. Each value is on the standard 0–10 amp scale.

Gain8
Bass6
Mid6
Treble7
Presence6
Volume6

These numbers are for an EVH 5150III 100W. On your amp, they won't sound the same.

Get the settings for my amp
Guitar setup

How the artist had their guitar configured for this take.

TuningCustom tuning
Pickup selector
NeckNk+MdMiddleBr+MdBridge
Guitar knobs
Tone10
Volume10
Recording notes

Same 'hell tone' Isaac Hale built for the record — seven-string in drop A into an EVH 5150 III through a Mesa 4x12 straight cab, screamer in front, gate working hard. Where Suffocate has a clean feature section, this one is unrelenting, so the gate and low-end control matter even more. Live the whole rig is modelled on a Quad Cortex.

FAQ

Common Questions About the "Blinding Faith" Tone

  1. What guitar did Knocked Loose use on "Blinding Faith"?

    Knocked Loose tracked "Blinding Faith" on an Ibanez RG752AHM Prestige 7-String (released 2024). Pickup selector: bridge pickup on the guitar. The track is in Custom tuning, so retune before you dial anything in.

  2. What amp settings does "Blinding Faith" need?

    On EVH 5150III 100W: Gain 8, Bass 6, Mid 6, Treble 7, Presence 6, Volume 6. Each value is on the standard 0–10 amp scale; match them on your amp first, then nudge to taste. ToneMirror can translate these positions for whatever amp you actually own.

  3. Can I play "Blinding Faith" without an EVH 5150III 100W?

    Yes. ToneMirror takes the original recipe above and adapts it to your guitar, amp, and pedals - so you can chase the "Blinding Faith" tone on a Katana, a Helix, a tube combo, or anything else. The translation accounts for EQ curve, gain structure, and pickup type so the result actually sounds like the record, not just the same knob numbers on different gear.

  4. What pedals are on "Blinding Faith"?

    The original signal chain for "Blinding Faith" runs through Maxon SD9 Sonic Distortion, ISP Technologies Decimator II Noise Reduction. Whether you own those exact units or close substitutes, ToneMirror maps the pedal voicings onto the pedalboard you actually have.

Related tones

Tone references for "Blinding Faith" by Knocked Loose are provided for educational use. ToneMirror is not affiliated with the artists or labels referenced.

Adapt to my gear