Loveless album cover - My Bloody Valentine
Guitar tone settings

How to Dial In "Sometimes" by My Bloody Valentine - Guitar Tone Settings

The rig

What My Bloody Valentine Actually Used on "Sometimes"

The settings

Original Knob Positions, Pickup, and Tuning

Amp settings - Marshall JCM800 2203

Where to set the knobs for this tone. Each value is on the standard 0–10 amp scale.

Gain4
Bass5
Mid5
Treble6
Presence5
Volume6

These numbers are for a Marshall JCM800 2203. On your amp, they won't sound the same.

Get the settings for my amp
Guitar setup

How the artist had their guitar configured for this take.

Pickup selector
NeckNk+MdMiddleBr+MdBridge
Guitar knobs
Tone6
Volume7
Recording notes

From Loveless (1991). A slow, swaying Loveless track in which wide, bending guitar chords sit under a hushed vocal. Accounts of the Loveless sessions describe Jazzmasters and Jaguars through a mix of Vox AC30s, Hiwatt heads, Fender Dual Showmans and Marshall JCM800s, and name a Yamaha SPX90 as the main reverse-reverb source; one of them hedges that twin JCM800 stacks were Kevin Shields' main setup around 1991. They describe the album rather than this song, so a Jazzmaster through a JCM800 2203 with the SPX90 stands in for that setup. Set the amp on the edge of breakup and use the neck and bridge pickups. Tuning isn't documented here.

FAQ

Common Questions About the "Sometimes" Tone

  1. What guitar did My Bloody Valentine use on "Sometimes"?

    My Bloody Valentine tracked "Sometimes" on a Fender Jazzmaster (Original) (released 1991). Pickup selector: neck + bridge (position 3 / out-of-phase) on the guitar.

  2. What amp settings does "Sometimes" need?

    On Marshall JCM800 2203: Gain 4, Bass 5, Mid 5, Treble 6, Presence 5, Volume 6. Each value is on the standard 0–10 amp scale; match them on your amp first, then nudge to taste. ToneMirror can translate these positions for whatever amp you actually own.

  3. Can I play "Sometimes" without a Marshall JCM800 2203?

    Yes. ToneMirror takes the original recipe above and adapts it to your guitar, amp, and pedals - so you can chase the "Sometimes" tone on a Katana, a Helix, a tube combo, or anything else. The translation accounts for EQ curve, gain structure, and pickup type so the result actually sounds like the record, not just the same knob numbers on different gear.

  4. What pedals are on "Sometimes"?

    The original signal chain for "Sometimes" runs through Yamaha SPX90. Whether you own those exact units or close substitutes, ToneMirror maps the pedal voicings onto the pedalboard you actually have.

Related tones

Tone references for "Sometimes" by My Bloody Valentine are provided for educational use. ToneMirror is not affiliated with the artists or labels referenced.

Adapt to my gear