Built for Speed album cover - Stray Cats
Guitar tone settings

How to Dial In "Rev It Up and Go" by Stray Cats - Guitar Tone Settings

The rig

The Gear Behind "Rev It Up and Go"

The settings

Original Knob Positions, Pickup, and Tuning

Amp settings - Bassman

Where to set the knobs for this tone. Each value is on the standard 0–10 amp scale.

Gain3
Bass5
Mid6
Treble7
Presence6
Volume6

These numbers are for a Bassman. On your amp, they won't sound the same.

Get the settings for my amp
Guitar setup

How the artist had their guitar configured for this take.

Pickup selector
NeckNk+MdMiddleBr+MdBridge
Guitar knobs
Tone8
Volume9
Recording notes

From Built for Speed (1982). A hot-rod rockabilly song with driving chord riffs and a short, flashy solo. Setzer's rig has been a 1959 Gretsch 6120 through an early-1960s Fender Bassman run to the edge of its clean headroom, with a Roland RE-301 Space Echo for slapback from the early Eighties, per Premier Guitar and Guitar World. The Setzer signature 6120, a '59 Bassman reissue and the RE-301 stand in for them. Set the amp clean with a little edge and use the bridge pickup. Tuning isn't documented here.

FAQ

Common Questions About the "Rev It Up and Go" Tone

  1. What guitar did Stray Cats use on "Rev It Up and Go"?

    Stray Cats tracked "Rev It Up and Go" on a Gretsch 6120 (released 1982). The Gretsch G6120T-BSSMK Brian Setzer Signature Nashville Hollow Body '59 Smoke named above is a modern equivalent, not the guitar on the record. Pickup selector: bridge pickup on the guitar.

  2. What amp settings does "Rev It Up and Go" need?

    On a Bassman: Gain 3, Bass 5, Mid 6, Treble 7, Presence 6, Volume 6. Each value is on the standard 0–10 amp scale; match them on your amp first, then nudge to taste. ToneMirror can translate these positions for whatever amp you actually own.

  3. Can I play "Rev It Up and Go" without a Bassman?

    Yes. ToneMirror takes the original recipe above and adapts it to your guitar, amp, and pedals - so you can chase the "Rev It Up and Go" tone on a Katana, a Helix, a tube combo, or anything else. The translation accounts for EQ curve, gain structure, and pickup type so the result actually sounds like the record, not just the same knob numbers on different gear.

  4. What pedals are on "Rev It Up and Go"?

    The original signal chain for "Rev It Up and Go" runs through Roland RE-301 Chorus Echo. Whether you own those exact units or close substitutes, ToneMirror maps the pedal voicings onto the pedalboard you actually have.

Related tones

Tone references for "Rev It Up and Go" by Stray Cats are provided for educational use. ToneMirror is not affiliated with the artists or labels referenced.

Adapt to my gear