In this guide · 10 sections
- 1What a wah pedal does: heel down, toe down and the sweep
- 2How to rock a wah in time
- 3The cocked-wah sound
- 4Wah before or after drive and fuzz
- 5Cry Baby vs Vox wah, Q and sweep range
- 6Wah for funk rhythm vs wah for solos
- 7Auto-wah, envelope filters and the talk box
- 8The shortcut: the rig behind a song's wah part
- 9Songs to try it on
- 10FAQ
To use a wah pedal, put it before your drive pedals and learn its two ends: heel down is dark and thick, toe down is bright and nasal. Then rock it in time, landing the bright toe-down position on the beats or accents you want to stand out. For funk, rock it in eighths or sixteenths over muted, clean strumming; for solos, move it with your phrasing; and park it partway for the cocked-wah honk.
- Heel down is dark and thick, toe down is bright and cutting; the sweep between them makes the vowel.
- Rock it in time: pick a subdivision and land the toe-down position on the accents.
- A cocked wah is the pedal parked partway - a fixed midrange honk, mostly for leads.
- Wah goes before the drives; if a vintage Fuzz Face squeals behind it, put the fuzz first.
- Cry Baby and Vox wahs share one circuit; the Q and the sweep range matter more than the name.
What a wah pedal does: heel down, toe down and the sweep
A wah is a filter with a sharp peak - a narrow band of frequencies boosted well above the rest - and the rocker moves that peak up and down. Heel down puts it low, toe down puts it high, and sweeping between the two makes the vowel-like “wah” the pedal is named for. On most wahs you switch it on by pressing hard on the toe until the switch clicks.
| Position | Sound | Use it for |
|---|---|---|
| Heel down | Dark, thick, muffled - an "oo" | Low, growling rhythm accents; the start of a sweep |
| Halfway | A nasal, honking midrange | The cocked-wah lead tone |
| Toe down | Bright, cutting, piercing - an "ee" | Accents and screaming high notes |
| Full sweep | The vowel itself: "wow" or "wah" | Funk rhythm, expressive lead phrasing |
Because the peak is a boost, the wah also changes your level and gain. Toe down can turn shrill into a bright amp, and heel down can get muddy into a bassy one. If the ends of the sweep sound bad, adjust the amp: a little less treble or presence for a harsh toe, a little less bass for a woolly heel.
How to rock a wah in time
The difference between a wah that sounds like a record and one that sounds like a beginner is timing. A sweep that wanders across the beat sounds random. A sweep locked to a subdivision becomes part of the rhythm, which is how the classic wah parts work.
Start with quarter notes
Set a metronomeslow, around 70-80 BPM. Press toe-down on every click and rock back to the heel on every “and” between them, strumming muted strings so you hear only the filter. When that is automatic, play real chords over it. The bright point now lands on the beat, so the pedal accents the rhythm instead of blurring it.
Then eighths and sixteenths
Double the motion: toe on every eighth note, heel on every sixteenth in between. This is the engine of funk wah - fast, short, even rocks under muted sixteenth-note strumming. Use only part of the travel at speed; nobody sweeps heel to toe sixteen times a bar. Some parts invert the pattern and land the heel on the beat for a darker, rounder groove, so try both against the song.
- Keep your heel planted and move from the ankle. Lifting the whole leg makes the motion uneven.
- Lock the pedal to your picking hand. Both should move in the same subdivision.
- Practice with the record. Mute your guitar and copy just the pedal motion until it matches.
The cocked-wah sound
A cocked wah is a wah you do not rock. Park it partway and it becomes a fixed filter: a narrow, nasal midrange peak that cuts through a band like a horn. It is a lead sound above all - Michael Schenker's singing, half-cocked lead voice with UFO on “Doctor Doctor” is the textbook example.
- Find the spot: hold a note on the B or high E string and rock very slowly until it honks. It is usually somewhere between a third and two thirds of the way down.
- Adjust the gain: the peak boosts your signal into the amp, so a cocked wah adds gain. Back the drive off a touch.
- Keep it there: the sound depends on consistency. If your pedal creeps, tighten the rocker tension or mark the position on the pedal.
Players often get close to the nasal riff of Dire Straits' “Money for Nothing” with a cocked wah, though accounts of that session credit the sound as much to an accident of microphone placement as to any pedal.
Wah before or after drive and fuzz
The standard place for a wah is near the front of the board: after the tuner, before every drive pedal. The distortion that follows smooths and sustains the sweep, which gives the vocal, singing wah sound on most records. The pedal order guide places it in the full chain.
Wah after a high-gain pedal is a different sound, not a wrong one: sharper and more synth-like, because the filter is sweeping a signal already packed with harmonics. It is also noisier and harsher at toe down. A few players move the wah into a high-gain amp's effects loop for the same reason.
The Fuzz Face problem
Vintage-style fuzzes like the Fuzz Face have an unusually low input impedance, built to see a guitar pickup directly. Behind a classic unbuffered wah, the two circuits load each other, and the fuzz can squeal, oscillate or turn thin and gated. There are three fixes: put the fuzz first and the wah after it; use a wah with a buffer or a fuzz-friendly setting; or choose a fuzz designed to tolerate a pedal in front. Moving the fuzz first also keeps its clean-up from the guitar's volume knob, which a buffer in front would spoil. The fuzz settings guide covers that cleanup trick.
Cry Baby vs Vox wah, Q and sweep range
The wah pedal was developed in the late 1960s at the Thomas Organ Company, which sold it under both the Vox and Cry Baby names. Today Dunlop makes the Cry Baby and Vox makes its own reissues, and both still follow that circuit. The differences are in the voicing: Vox models are usually described as smoother and more vocal, the standard Cry Baby as a little brighter and more aggressive. Two pedals of the same model can differ almost as much, because the sound hangs on a few component values.
Q: how narrow the peak is
A high Q is a narrow, pronounced peak - quacky, vocal and dramatic. A low Q is broader and smoother, more of a tone control than a voice. Funk and cocked sounds like a high Q; a wah used for subtle lead shaping likes it lower.
Range: where the sweep sits
A lower range suits heavy and down-tuned parts, where a standard wah's top end turns shrill; a higher range suits bright leads and funk. Bass wahs move the whole sweep down. Adjustable wahs such as the Cry Baby 95Q and 535Q add a Q control and a volume boost, and the 535Q a range selector; many other wahs have internal trim pots for the same job. Signature wahs are mostly these choices made for you.
The standard Cry Baby is credited on more recorded songs than any other wah, with Dunlop variants and Vox reissues behind it. The list includes envelope filters and talk boxes, which belong to the same family.
- 1Dunlop Cry Baby GCB95191 tones
- 2Dunlop Cry Baby 95Q Wah26 tones
- 3Dunlop ZW45 Zakk Wylde Cry Baby Wah25 tones
- 4MXR M222 Talk Box18 tones
- 5Vox V847 Wah16 tones
- 6Electro-Harmonix Q-Tron+12 tones
- 7Vox V846 Vintage Wah11 tones
- 8Dunlop SC95 Slash Cry Baby Classic Wah8 tones
Wah for funk rhythm vs wah for solos
Funk rhythm
Funk wah is a rhythm instrument. Use a clean, bright amp with plenty of headroom, the middle or neck-and-middle pickup, and muted sixteenth-note strumming, with the pedal rocking in a steady eighth or sixteenth pattern. The sweep stays short and even, and the gain stays off - distortion would smear the filter's movement. Charles “Skip” Pitts' part on Isaac Hayes' “Theme from Shaft” is the model. The funk tone guide covers the rest of the rig.
Theme from ShaftIsaac Hayes · 1971Settings & rig
Papa Was a Rollin' StoneThe Temptations · 1972Settings & rig
Car WashRose Royce · 1976Settings & rig
Solos
In a solo, the wah follows your phrasing rather than a fixed rhythm. Rock toward the toe as you pick or bend into a note and let it fall back as the note fades, so the filter shapes each phrase like a voice. Use the top half of the sweep for most of it, and save heel-down for growls. Stevie Ray Vaughan's “Say What!” is a study in this: the pedal moves with the lines, not the beat. With drive, keep the gain moderate, since a wah adds its own boost at the peak.
Auto-wah, envelope filters and the talk box
An envelope filter(or auto-wah) moves the filter for you, following how hard you pick: dig in and it sweeps up, play softly and it stays down. The Mu-Tron III defined the sound - Jerry Garcia's quacking lead on the Grateful Dead's “Fire on the Mountain” is a well-known example. Sensitivity sets how much picking it takes to open the filter, and range or peak set where the sweep sits and how sharp it is. Put it before the drives, and keep compression in front of it light, since a compressor flattens the dynamics it reads. Some auto-wahs sweep at a set rate instead, like a phaser in wah form.
A talk boxis not a filter pedal at all. A small driver sends your guitar sound up a plastic tube into your mouth, you shape it with your mouth like a vowel, and a vocal microphone picks it up. That is the sound of Peter Frampton's “Do You Feel Like We Do”, Joe Walsh's “Rocky Mountain Way” and the intro of Bon Jovi's “Livin' on a Prayer”. Use a moderately driven tone with strong mids - heavy distortion turns the vowels to mush - and remember it needs a mic and a PA to be heard.
The shortcut: the rig behind a song's wah part
Technique is yours to practice, but the rest of a wah part - the amp, how much gain, which pickup, what else is in the chain - is a matching problem. ToneMirror solves it per song. Pick the track, enter your guitar, amp and pedals, and it returns the amp knobs, pickup and tuning for your rig, with your wah and other pedals in signal-chain order.
If the record has a wah or a talk box and your board does not, it says so and names the kind of pedal that would cover it. Start from the tone matcher, or browse the tone library for the song.
Songs to try it on
Each of these has its recorded rig and settings on its own page - open one, then get it translated for your gear.
Frequently asked questions
Should a wah pedal go before or after distortion?
Before, in most rigs - the distortion smooths the sweep into the vocal sound on most records. Wah after a high-gain pedal is sharper and more synth-like, and noisier. The exception is a vintage Fuzz Face, which can squeal behind a wah and is often happier placed first.
Why does my wah squeal or sound thin with my fuzz pedal?
Vintage-style fuzzes like the Fuzz Face have a very low input impedance and interact badly with a classic unbuffered wah in front of them. Put the fuzz before the wah, use a wah with a buffer, or use a fuzz designed to work with pedals ahead of it.
What is the difference between a Cry Baby and a Vox wah?
Both come from the same late-1960s circuit. Vox models are usually described as smoother and more vocal, and the standard Cry Baby as a little brighter and more aggressive. The pedal's Q and sweep range, which some wahs let you adjust, make a bigger difference than the brand.
What is a cocked wah?
A wah left parked partway instead of rocked, which turns it into a fixed midrange filter with a nasal, honking tone. Find the spot by rocking slowly over a held note until it honks, then leave it there. It is mostly a lead sound, and Michael Schenker is its best-known user.
How do I use a wah pedal for funk?
Use a clean, bright amp, the middle or neck-and-middle pickup, and muted sixteenth-note strumming. Rock the pedal in a steady eighth- or sixteenth-note pattern with short, even movements, landing the bright toe-down position on the accents. Practice with a metronome until the pedal and your picking hand lock together.
Is there a tool that shows the rig behind a song's wah part?
ToneMirror's tone pages list the wah and other pedals documented on each recording. Its tone matcher, part of the subscription, then returns amp knobs, pickup, tuning and pedal settings for the gear you own, in signal-chain order.




























