For bass players
Any song's bass tone, on the bass you actually play.
ToneMirror is a tone matcher for bass as well as guitar: pick a song, tell it your bass, amp or modeler and pedals, and it gives you that song's bass settings for your rig.
Matched to the bass, amp and pedals you own.

- Pickup?
- Gain?
- Bass?
- Middle?
- Treble?
- Effects, in order?
Filled in for the bass, amp and pedals you play, and the song you pick.
What gets in the way
Tone advice forgets the bass
Most tone guides are written for guitar. The bass gets a line at the end, if that.
The record's rig isn't yours
A Precision through a big tube head doesn't translate knob for knob to a Jazz Bass and a combo. The settings have to move with the gear.
Direct, amped or both
Plenty of bass parts went straight into the desk, others through a cranked amp. The settings that get you to each are different.
Tuned down with the guitars
Each song's tuning is listed, so the drop D and E♭ songs don't catch you out halfway through the first chorus.
How it works for you
- 1
Enter your bass rig
Your bass, your amp or modeler, and any pedals - compressor, drive, octave, whatever is on the board.
- 2
Pick the song
Search the bass tones by song or artist.
- 3
Get the bass settings
Gain and EQ for your amp, which pickup, the tuning and the effects - in signal-chain order on a modeler.
A real song, two rigs
The documented amp settings from the record, and what ToneMirror works out for you.

| Amp knob | On the record | On your rig |
|---|---|---|
| Gain | 4 | ? |
| Bass | 6 | ? |
| Middle | 6 | ? |
| Treble | 7 | ? |
| Presence | 6 | ? |
| Volume | 7 | ? |
The record's values are for the amp it was made on. The same numbers on a different amp, guitar and pickups give a different sound - which is why your column is worked out for your rig.
Bass tones players are matching
Open any song for the rig and settings on the record, then get them for yours.
Questions
Is there an app that matches a song's bass tone to my gear?
ToneMirror does. Pick a song and tell it your bass, amp or modeler and pedals; it looks up how the bass on the record was recorded and gives you the settings for your rig - the amp's gain and EQ, which pickup, the tuning and any effects.
Does it work with a bass modeler or multi-effects?
Yes. For a modeler it lays out the blocks to build in signal-chain order, using the unit's own model names where it has them verified and describing the voice to choose where it doesn't.
What about bass parts that were recorded direct?
The settings follow the record. Where the recording notes say a part went straight into the desk, the settings aim for that clean, full-range sound on the rig you have.
Do I need special gear?
No. It works from whatever you play - pick your bass, amp or modeler and pedals in the app, and request anything that isn't listed.












