Shoegaze Guitar Tone: Walls of Fuzz, Reverb and Modulation

How to get a shoegaze and dream pop guitar tone: fuzz into big reverb, reverse and modulated textures, the tremolo arm, offset guitars, and layering.

Works with any guitar, bass, amp or modeler.

By the ToneMirror team · Updated

In this guide · 10 sections
  1. 1What makes a guitar tone sound shoegaze
  2. 2Fuzz into the amp: building the wall
  3. 3Reverb and delay: long, dark and loud in the mix
  4. 4Modulation: chorus, flanger, vibrato and tremolo
  5. 5Glide guitar, offset guitars and tunings
  6. 6Layering, volume and playing it live
  7. 7Dream pop: the cleaner side
  8. 8The shortcut: shoegaze settings for your rig
  9. 9Songs to try it on
  10. 10FAQ
The short answer

A shoegaze guitar tone is fuzz into big reverb. Run a Big Muff-style fuzz with the tone below noon into an amp set clean to mildly crunchy, then a long, dark reverb - 4 seconds or more at a 40-60% mix - often with a long delay and a slow chorus or vibrato. Work the tremolo arm while you strum so chords bend, layer parts and play loud. Dream pop drops the fuzz for the neck pickup, chorus and reverb.

  • The core recipe is fuzz into a long, dark reverb - the reverb turns the fuzz into a wash instead of a buzz.
  • Shoegaze runs more gain and the bridge pickup; dream pop stays near-clean on the neck pickup.
  • Kevin Shields' glide guitar is a technique, not a pedal: hold the tremolo arm while you strum so every chord bends.
  • Reverse reverb, swells and long delays hide the pick attack, so notes bloom instead of starting.
  • Big Muff-style fuzz scoops the mids - put them back at the amp or the wall vanishes in a band mix.

What makes a guitar tone sound shoegaze

Shoegaze came out of Britain in the late 1980s and early 1990s - My Bloody Valentine, Ride, Slowdive, Lush, Chapterhouse - and the music press named it after players staring down at their effects pedals. The Jesus and Mary Chain had already shown the way in 1985, burying sixties-style pop songs under feedback and fuzz on Psychocandy.

The guitar is texture rather than articulation. Notes blur into each other, chords become a wall, the vocal sits inside the noise instead of on top of it, and the guitar works like a pad. Everything in the rig serves that: gain for density, reverb and delay for size, modulation for movement, and a tremolo arm to keep the pitch from ever settling.

StyleWhere the sound comes fromPickupHear it in
Classic shoegazeFuzz into a mild amp, long reverb, modulationBridgeMy Bloody Valentine, Ride
Ethereal and dreamyClean amp, chorus, long delay, huge reverbNeckCocteau Twins, Slowdive's quieter songs
Noise popFuzz and feedback layered over simple pop chordsBridgeThe Jesus and Mary Chain
Heavy modern shoegazeHigh gain, lower tunings, reverb kept hugeBridgeBands mixing shoegaze with metal
Broad strokes - each band's records vary from song to song. The tone pages list what each recording used.

Here is where recorded shoegaze tones sit on the amp:

Typical shoegaze guitar settings
Median across 440+ recorded shoegaze tones in the ToneMirror catalog
Gain6
range 1–8.5
Bass5
range 4–7
Mid5
range 3–6.5
Treble6
range 5–7
Presence6
range 4–7
Volume6.5
range 3.5–8.5
Each dial shows the median value on a 0-10 scale; the range under it is the lowest and highest setting in the set. A starting point to adjust by ear - not a preset.

The gain lands around the middle, not maxed: the amp adds body and grit, and the fuzz pedal supplies the saturation. The EQ is close to flat, with the treble and presence a little above the rest.

Fuzz into the amp: building the wall

The wall starts with a fuzz. A Big Muff-style pedal is the default - thick, sustaining and smooth enough that a chord stays a chord - and Big Muff variants are the fuzz credited on the most recorded songs by a distance:

The fuzz pedals on the most recorded tones
  1. 1Electro-Harmonix Big Muff Pi (NYC)813 tones
  2. 2Dunlop JHF1 Hendrix Fuzz Face (Silicon)85 tones
  3. 3Electro-Harmonix Green Russian Big Muff71 tones
  4. 4Electro-Harmonix Triangle Big Muff Pi62 tones
  5. 5Dallas Arbiter Fuzz Face42 tones
  6. 6Dunlop Jimi Hendrix Fuzz Face Mini36 tones
Pedals credited on the recorded tones in the ToneMirror catalog, counted per song. A model listed is the documented unit or its catalogued modern equivalent - each pedal's page has the songs.

Fuzz Faces sit high on that list too, but they are a vintage rock sound that cleans up with the guitar's volume knob. Shoegaze wants the opposite: a fuzz that stays saturated and sustains forever. Set it like this:

  • Sustain 1-4 o'clock. More than you would use for a lead. The reverb will soften it.
  • Tone 9-11 o'clock. Darker than feels right alone. Reverb multiplies fizz, and a bright fuzz into a long reverb turns into hiss.
  • Volume above unity, so the wall is louder than the clean sections.
  • Amp clean to mild crunch, mids at 5-6. A Big Muff scoops the mids; put them back at the amp or the wall disappears behind the drums.

Stacking works here in a way it rarely does elsewhere: a low-gain overdrive or a second fuzz into the first makes the wall denser and more compressed. The fuzz pedal settings guide covers each fuzz circuit and how it reacts to your guitar.

Reverb and delay: long, dark and loud in the mix

In most styles reverb sits behind the guitar. In shoegaze it is half the sound, so the settings go far past what you would use anywhere else:

EffectTimeMixNotes
Hall or modulated reverbDecay 4 seconds and up40-60%Tone dark; cut the lows so chords don't turn to mud
Reverse reverbSwell around 300-600ms50% and upThe note swells in after you pick it
Long delay400-800ms, feedback 40-60%25-40%Modulated or tape-style repeats blend into the reverb
Reverse delay400-800ms40-60%Plays each phrase back backwards; best on slow parts
Suggested starting points. Set the delay time to the song's tempo - quarter notes or dotted eighths - so the repeats lock to the groove.

Keep pre-delayshort, 0-30ms: here you want the attack swallowed, not separated from the tail. Reverse reverb does the same job more dramatically. It is all over My Bloody Valentine's Loveless, and the reverb pedal guide covers how each reverb type is set.

Reverb before the fuzz

The standard order puts reverb last. Breaking it on purpose - a short reverb in front of the fuzz - makes the fuzz distort the reverb tail too, so every chord swells into a saturated cloud. Keep a long reverb at the end of the chain as well, and try it both ways at volume.

Swells

Roll the guitar's volume knob up after each chord, or use a volume pedal before the delay and reverb, so the attack disappears and only the bloom is left. Time a long delay with the free delay calculator, and see the delay pedal guide for tape and modulated delays.

Modulation: chorus, flanger, vibrato and tremolo

Modulation keeps a static wall moving. A Boss CE-2-style chorus is the pedal credited most often on recorded shoegaze and dream pop tones, and it is the place to start:

  • Chorus:rate low (9-10 o'clock), depth past noon. Slow and deep gives the woozy, slightly seasick shimmer; fast and deep just warbles.
  • Flanger: slow rate, high regeneration, for jet-like sweeps across sustained chords. Use it on a part, not the whole song.
  • Vibrato: pitch modulation with no dry signal. At a slow rate and low depth it imitates a tremolo arm - useful on a guitar without one.
  • Tremolo: volume pulsing, for a rhythmic throb under a clean or lightly fuzzed part.

Put modulation after the fuzz and before delay and reverb, so the repeats carry the movement. For a softer, blurrier effect, try it after the reverb so it modulates the whole tail. The chorus, phaser and flanger guide covers each pedal control by control.

Glide guitar, offset guitars and tunings

The most imitated sound in the genre is not a pedal. Kevin Shields of My Bloody Valentine called it “glide guitar”: he holds the tremolo arm in his strumming hand and works it continuously while he strums, so every chord bends slightly flat and sharp the whole time it rings. Through fuzz and reverb, that constant pitch drift becomes the woozy, out-of-focus wash of Loveless. Hear it on “Soon”.

How to do it

  • Use a floating tremolo.A Jazzmaster or Jaguar is ideal; a Strat works if the bridge is set to float rather than decked. A hardtail can't do it - use a vibrato pedal instead.
  • Angle the arm toward the strings so it rests against your palm, and tighten it enough to stay where you leave it.
  • Move it a little, constantly. A quarter tone of drift is plenty; big dips sound like a whammy effect, not a wash.
  • Strum with the side of your hand while it holds the arm, and expect to retune often.

Why offset guitars

The Fender Jazzmaster is the guitar credited most on shoegaze and dream pop records, with the Jaguar next. Both have a floating vibrato with a long, soft travel that suits glide technique, and the Jazzmaster's wide, flat single coils are warmer and fuller than a Strat's - a good match for fuzz. If strings jump out of the saddles when you strum hard, go up a gauge or fit a sturdier bridge.

Tunings

Most shoegaze records are in standard tuning, with drop D the most common alternative. Shields used a range of altered tunings on Loveless, and that is worth borrowing: any tuning that lets open strings drone against fretted notes - an open chord tuning, or standard with one string moved - turns into a ringing cluster once fuzz and reverb get hold of it.

Layering, volume and playing it live

Shoegaze records stack guitars: a fuzzed rhythm, a clean chorused arpeggio, swells and feedback on separate tracks. When you record, give each layer its own job and EQ - darker fuzz, brighter clean part, swells panned wide - so the wall stays deep instead of turning to mud.

Live, one guitar has to do the work of several, so:

  • Play loud enough for the amp to feed back - controlled feedback is part of the sound. Wear earplugs; this genre is unkind to ears.
  • Go stereo if you can. Two amps or a stereo reverb and delay make one guitar sound like a wall.
  • Use a looper or a freeze reverb to hold a chord while you play over it.
  • Leave the vocal a gap. Lower the reverb mix in verses and push it in choruses.

The noise-pop end of the genre shows how far a simple pop song can be buried in fuzz and still carry a tune:

Dream pop: the cleaner side

Dream pop uses the same effects with the fuzz taken out. The amp is clean, the neck pickup takes over from the bridge, and chorus, delay and reverb do the work:

Typical dream pop guitar settings
Median across 330+ recorded dream pop tones in the ToneMirror catalog
Gain3
range 1–8
Bass5
range 4–6.5
Mid5
range 3–6
Treble6
range 4.5–7
Presence5
range 3.5–6.5
Volume6
range 3–7.5
Each dial shows the median value on a 0-10 scale; the range under it is the lowest and highest setting in the set. A starting point to adjust by ear - not a preset.

Compared with shoegaze, the gain drops well below the middle and the rest stays close to flat. Start here:

  • Neck pickup, or a Jazzmaster's rhythm circuit for a preset darker sound.
  • Treble slightly down, so the reverb tail is soft rather than glassy.
  • Chorus slow and fairly deep, then a long modulated delay and a big reverb.
  • Simple arpeggios and open strings - let the effects write the movement.

Robin Guthrie's guitar with Cocteau Twins is the model: modulation, delay and reverb stacked on a clean tone until the guitar becomes a shimmering cloud, as on “Cherry-Coloured Funk”. Browse more in dream pop.

The shortcut: shoegaze settings for your rig

A shoegaze tone is a stack of decisions - how much fuzz into how dirty an amp, which reverb and how long, which modulation and where - and a specific record narrows every one of them. Translating that onto pedals you own, or onto a modeler's blocks, is where the time goes.

ToneMirror does that translation. Pick the song, enter the guitar, amp or modeler and pedals you own, and it returns amp settings, the pickup and tuning, and pedal settings in signal-chain order - and tells you which effects on the record your rig doesn't cover. On a modeler such as a Boss Katana, Line 6 Helix or Positive Grid Spark it lays out the blocks to build (see modeler settings). Start from the tone matcher.

Songs to try it on

Each of these has its recorded rig and settings on its own page - open one, then get it translated for your gear.

Frequently asked questions

What pedals do I need for shoegaze?

At minimum, a fuzz and a reverb that can go long - a Big Muff-style fuzz into a hall or modulated reverb gets you most of the way. Add a delay for size and a chorus or vibrato for movement. A guitar with a floating tremolo arm matters as much as any pedal.

What reverb settings work for shoegaze?

Far wetter than usual: a hall, shimmer or modulated reverb with a decay of 4 seconds or more, the mix around 40-60%, a dark tone and a short pre-delay. Cut the reverb's low end so chords don't turn to mud, and lower the mix when the vocal needs space.

How did Kevin Shields get the My Bloody Valentine guitar sound?

Mostly through technique and layering rather than a single pedal. He held the tremolo arm while strumming so chords bent continuously, used altered tunings, ran heavy distortion, and made heavy use of reverse reverb on Loveless. The tone pages for each song list what is documented about that recording.

Do I need a Jazzmaster for shoegaze?

No, but you need a floating tremolo arm for glide-style bends, which is why offset guitars are so common in the genre. A Strat with its bridge set to float works; on a hardtail, a vibrato pedal at a slow rate and low depth imitates the wobble.

What is the difference between shoegaze and dream pop guitar tone?

Shoegaze is fuzz-driven: more gain, the bridge pickup and a wall of distortion under the reverb. Dream pop is clean or nearly clean, usually on the neck pickup, with chorus, delay and reverb doing the work. Both rely on long, wet reverb.

Is there an app that gives shoegaze settings for a specific song?

ToneMirror does this. You pick a song from its catalog of recorded guitar and bass tones, enter the guitar, amp or modeler and pedals you own, and it returns amp, pickup, tuning and pedal settings adapted to your rig, including the blocks to build on a modeler.

Get settings for my rig